EMG 15 ton power press

State New
Category Press
Brand EMG
Model 15T
Serial number -
Year of manufacture -
Inventory number 100026
> Data sheet

With electro-pneumatic mono-disc clutch

Technical data

Adjustable stroke:  from 5 to 75 mm
Swan-neck depth:   180 mm
Shut Height:   300 mm
Stroke per minute:   140
Press ram adjustment:   from 0 to 50 mm

Standard equipment

20° tiltable frame
6-digit counter with reset switch
8-digit counter without reset switch
Centralised lubrication by hand pump
Bi-manual push-button safety control
Stroke-by-stroke or continuous working
Ejection bar in the press slider

composition and accessories

Options (non-included)

Automatic vertical shield with pedal control
Pedal control for machine without movable shielding  
SICK safety opto-electronic device : simple and double  passage
Unblocking wedge system for the slider at the dead bottom centre 
Blower cam with magnetic sensor, solenoid valve 3/2 + tap locking valve
Additional cam to collect information (feeder control, …)
Electronic cams Omron with 8 outlets
Special selector for outside control (cycle departure outside of the press)
6-digit counter pre-selector  
Automatic lubrication with level control  (normal use)
Automatic lubrication with level control (intensive use-outflow x 4) 
Rubber cushion  
Worktable halogen lighting : 50W with 500 mm flex  
Worktable lighting : 2 neon tubes (18 W, only if Safety Opto-Electronic device)
Variable speed drive with selection by potentiometer (220 V mono)
Exhaust pipe to decrease the sound level (2 dB)
Metal sheet under press slider to collect oil (loss of 8 mm  for clearance height)  …...
Set of 2 anvil stakes DIN 508 M12 for T-grooves  
Set of 4 anti-vibration supports diameter 90 mm
Lubricating kit (2 l pneumatic oil + 2 l lubricating oil)
Band feeder   Straightener   Decoiler