Login
showmenu

EMG 45 ton power press

New
Category Excentric press 
Brand EMG 
Model 45T 
Serial number
Manufacturing year
Stock number 100028 
Technical sheet
With electro-pneumatic mono-disc clutch

Technical data

Adjustable stroke : from 6 to 100 mm
Swan-neck depth : 220 mm
Shut Height : 350 mm
Stroke per minute : 130 
Press ram adjustment : from 0 to 70 mm

Standard equipment

Fixed frame
6-digit counter with reset switch
8-digit counter without reset switch
Automatic lubrication with level control
Bi-manual push-button safety control
Stroke-by-stroke or continuous working
Hydraulic unblocking system of the sliders
Balancing system for the sliders
Ejection bar in the press slider

Options (non-included)

Automatic vertical shield with pedal control
SICK safety opto-electronic device : simple and double passage
Pedal control for machine without movable shielding  
Blower cam with magnetic sensor, solenoid valve 3/2 + tap locking valve
Tilt table frame at 20° (hydraulic jack) 
Additional cam to collect information (feeder control, …)
Electronic cams Omron with 8 outlets
Special selector for outside control (cycle departure outside of the press)
6-digit counter pre-selector  
Fantini rubber cushion model PA/2ST : 60 mm stroke, 3-ton power at 6,5 bars with table plug, 80 mm thick, with 4 obrounds & 4 ejectors of 85 mm  
Worktable halogen lighting : 50W with 500 mm flex  
Worktable lighting : 2 neon tubes (18 W, only if Safety Opto-Electronic device)
Variable speed drive with selection by potentiometer (380 V Tri)  
Set of 2 anvil stakes DIN 508 M14 for T-grooves  
Set of 4 anti-vibration supports diameter 125 mm
Lubricating kit (2 l pneumatic oil + 2 l  lubricating oil)
Band feeder  -  Straightener  -  Decoiler