|
Serial number : 350701
*
Standard composition mounted on BENCH
Characteristics
:
*
Capacities:
- Height of centres 70 mm
- Maximum distance between centres 275 mm
* Bed:
- Length 600 mm
- Height 120 mm
* Headstock:
- For chucks type W 12
- Spindle bore diam. 12 mm
- Maximum through-bore diam. 8,2 mm
* Carriage:
- Stroke of longitudinal tool slide 60 mm
- Stroke of transverse tool slide 65 mm
* Swing over carriage:
- without rear toolholder 85 mm
- with rear toolholder 45 mm
- Height of Centres over carriage 16 mm
- Dimensions of tools 8 x 8 mm
* Tailstock:
- Internal spindle taper 2 °
- Spindle stroke 45 mm
* Spindle Drive:
- Motor Power 0,55 kW
- Speed variation by frequency converter with integral braking
- Spindle speed 5000 rpm
* Control panel comprising :
- Speed pre-selection
- Digital spindle speed indication
- Configuration of pedal functions by menu
- Spindle START / STOP
- Spindle REVERSE
- Auxiliary functions
* Colour:
- Lathe LIGHT BLUE NCS 1020-R80B
- Cabinet BLUE RAL 5012
* Netweight about 220 kg
* Over-all dimensions:
- Length 1600 mm
- Depth 800 mm
- Height 1370 mm
* With device 202-95000:
- Length 1600 mm
- Depth 800 mm
- Height 1540 mm
STANDARD
COMPOSITION :
* 1 Bench of 1600 x 800 x 900 mm comprising:
- 1 wooden plate of 1600 x 800 x 50 mm, cover blue Urphen
0
- 1 support 725 / 850 mm on the left side and on the right
side
- 1 cabinet LISTA B-314, dim. 564 x 725 x 850 mm
- useful height 750 mm with 7drawers,
- front height as follow 1 x 50 mm EA - 2 x 75 mm EA - 2 x
100 mm EA - 1 x 150 mm EA - 1 x 200 mm EA
- 1 Set of pieces for the motor assembling
- 1 Equipment for CE - Standards
- 1 Electrical equipment for 380 / 400 volts 50 Hz, 3-phases
- 1 Bed for overhead drive
- 1 Fixing rod 70-10100
- 1 Headstock W-12, with ball bearings for overhead drive
- 1 protective nut W 12 70-25180
- 1 manual drawbar W-12 70-32030
- 1 flat belt 15 x 920 x 1,5 mm 3525.01002
- 1 Screw-operated carriage
- 1 Screw-operated tailstock, spindle taper 2°
New
machine
.
|
|
