|
Serial number : 350446
Standard
composition, on CAST-IRON BASE
Characteristics :
*
Capacities:
- Height of centres 102 mm
- Maximum distance between centres 450 mm
- Maximum swing over bed 200 mm
- Maximum swing over carriage 120 mm
* Bed:
- Height 168 mm
- Width 130 mm
- Length 1000 mm
* Headstock:
- Spindle nose for chuck type W 20
- Spindle bore diam. 20 mm
- Through bore diam. 14,5 mm
* Carriage:
- Maximum stroke on bed 400 mm
- Tool slide , Width 80 mm - Length 194 mm
- Stroke manual traverse 90 mm
- Height of centres above slide 20 mm
- Size of tools 12 x 12 mm
- Cross slide, width 94 mm - length 300 mm
- Stroke manual traverse 100 mm
- Carriage body guide length on bed 250 mm
* Lead screw:
- Lead screw for turning and screwcutting diam. 40 mm
- Lead screw hardened, thread ground pitch 4 mm
* Turning:
- 8 longitudinal feeds : 0,02-0,03-0,04-0,06-0,08-0,1-0,2-0,3
mm/rev.
- Larger feeds obtainable by using screwcutting change gears
* Screwcutting:
- Maximum pitch using standard change gears 4 mm
- Chart for 20 metric threads 0,25 - 4 mm
- Chart for 25 English threads 80 - 6 tpi
* Tailstock:
- Internal spindle taper MORSE 2
- Spindle stroke 80 mm
- Spindle diameter 30 mm
* Steadies:
- Capacity of stationary steady diam. 70 mm
- Capacity of travelling steady diam. 40 mm
* Spindle drive:
- Motor power 4,0 kW
- Speed variation by frequency converter with integral braking
- Spindle speed from 50 up to 3000 rpm
* Controls panel comprising:
- Speed pre-selection
- Digital spindle speed indication
- Spindle START / STOP
- Spindle REVERSE
- Auxiliary functions
* Colour:
- Lathe LIGHT BLUE NCOS 1020-R80B
- Base DARK BLUE NCOS 3030-R90B
* Netweight about 590 kg
* Over-all dimensions:
- Length 1410 mm
- Depth 650 mm
- Height 1400 mm
* With device 202-95000:
- Length 1410 mm
- Depth 650 mm
- Height 1550 mm
STANDARD COMPOSITION :
* 1 Cast-iron base with 2 drawers 202-80400
- wooden board for chuck W 20 105-80406
* 1 Halogen Work Lamp 24V - 20 W 787739031
* 1 Equipment for CE - Standards
* 1 Electrical equipment for 380/400 volts 50 Hz - 3-Phases
* 1 Hardened bed with lead screw
* 1 Headstock W 20, closed, with ball bearings, for underneath
drive
* 1 protective nut W 20 102-20180
* 1 manual drawbar W 20 106-21050
* 1 belt Bando 2-7MS 1450 3520.00122
* 1 Screw cutting change gear box
- 1 drive pinion 102-85500
- 31 gears
* 1 Feed box
* 1 Carriage
* 1 Apron
* 1 Adjustable screw-operated tailstock, taper Morse 2
New
machine
.
|
|
