|
Serial number : 350656
Standard
composition mounted on BENCH
Characteristics
:
*
Capacities:
- Height of centres 102 mm
- Maximum distance between centres 470 mm
- Swing over bed 200 mm
- Swing over carriage 120 mm
* Bed:
- Height 168 mm
- Width 100 mm
- Lenght 1000 mm
* Headstock:
- For chuck type W 20
- Spindle bore diam. 20 mm
- Maximum throught-bore diam. 14.5 mm
* Carriage:
- Stroke of the longitudinal tool slide 90 mm
- Stroke of the transversal tool slide 100 mm
- Size of tools 12 x 12 mm
* Tailstock:
- Internal spindle taper Morse 2
- Spindle stroke 80 mm
* Spindle drive:
- Motor power 1.5 kW
- Speed variation by frequency converter witn integral braking
- Spindle speed 5000 rpm
- Spindle speed with Lever-operated quick-closing attachment
3000 rpm
* Control panel comprising:
- Speed per-selection
- Digital spindle speed indiaction
- Spindle START / STOP
- Spindle REVERSE
- Auxiliary function
* Colour:
- Lathe LIGHT GREY PAL 7035
- Cabinet BLUE RAL 5013
* Netweight about 320 Kg
* Over-all dimensions:
- Lenght 2000 mm
- Depth 800 mm
- Height 1370 mm
* With device 202-95000:
- Lenght 2000 mm
- Depth 800 mm
- Height 1540 mm
STANDARD
COMPOSITION:
*
1 Bench of 2000 x 800 x 900 mm, comprising:
- 1 wooden plate of 2000 x 800 x 50 mm, cover blue Urphen
N° 0
- 1 support of 725 / 800 mm on the left side ond on the right
side
- 1 cabinet LISTA B-314, dim. 564 x 725 x 850 mm - useful
height 750mm
with 7 drawers
* Set of pieces for the motor assembling
* 1 equipment fot CE-Standard
* 1 electrical equipment for 380/400 volts 50 Hz, 3-phases
* 1 bed for overhead drive, 1 fixing rod 102-10100
* Headstock W 20, open, with ball bearings, for overhead drive:
- 1 protective nut W 20
- 1 manual drawbar W 20
- 2 belt gates Polyflex 7M-1220
* 1 Screw-operated carriage
* 1 Adjustable screw-operated tailstock, taper Morse 2
New
machine
.
|
|
