Login
showmenu

EMG 6 Ton power press

New
Category Excentric press 
Brand EMG 
Model 6T 
Serial number
Manufacturing year
Stock number 100025 
Technical sheet
EMG 6 Ton power press

With electro-pneumatic mono-disc clutch

Technical Data

Adjustable stroke:   from 4 to 40 mm
Swan-neck depth:   120 mm
Shut Height:   200 mm
Stroke per minute:   240
Press ram adjustment:   from 0 to 30 mm

Standard equipment

20° tiltable frame
6-digit counter with reset switch
8-digit counter without reset switch
Centralised lubrication by hand pump
Bi-manual push-button safety control
Stroke-by-stroke or continuous working
Ejection bar in the press slider

Options (non-included)

Automatic vertical shield with pedal control
Pedal control for machine without movable shielding  
Unblocking wedge system for the slider at the dead bottom centre 
Blower cam with magnetic sensor, solenoid valve 3/2 + tap locking valve
Additional cam to collect information (feeder control, …)
Electronic cams Omron with 8 outlets
Special selector for outside control (cycle departure outside of the press)
6-digit counter pre-selector  
Automatic lubrication with level control  
Automatic lubrication with level control  (intensive use-outflow x 4)
Rubber cushion  
Worktable halogen lighting : 50W with 500 mm flex  
Variable speed drive with selection by potentiometer (220 V mono)
Exhaust pipe to decrease the sound level (2 dB)
Metal sheet under press slider to collect oil (loss of 6 mm  for clearance height)
Set of 2 anvil stakes DIN 508 M10 for T-grooves  
Set of 4 anti-vibration supports diameter 80 mm  .
Lubricating kit (2 l pneumatic oil + 2 l lubricating oil)
Band feeder  -  Straightener  -  Decoiler 

{"page":1,"position":1,"orderBy":null,"wheres":{"neuf":null,"categorycode":null,"permissions":1}}